SilentiumPC Armis AR6X TG RGB Full Tower Black, Transparent
zoom_out_map
chevron_left chevron_right
Out-of-Stock

SilentiumPC Armis AR6X TG RGB Full Tower Black, Transparent

SilentiumPC Armis AR6X TG RGB, Full Tower, PC, Black, Transparent, ATX, EATX, micro ATX, Mini-ATX, Metal, Tempered glass, Gaming

€126.04 Tax included €103.31 (tax excl.)
Tax included Shipping excluded
block Out-of-Stock
Close
VALIDO CON TRIPPODO PLUS
● Prodotto nuovo.
● Garanzia 48 mesi.
● Soddisfatto o rimborsato 30 giorni.

● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
 
Two tempered glass panels
Two tempered glass panels covering the Armis AR6X TG RGB case along with its showy RGB lighting are a response to the expectations of users who are particularly interested in the exposure of an aesthetically built and powerful computer. Behind the front panel there are three (out of five fans in total) Corona HP RGB 120 mm fans which enlighten the whole computer set.

The SilentiumPC Armis AR6X TG RGB chassis is equipped with two tempered glass panels (front and side), 4 Corona HP RGB 120 mm fans with unique, eye-catching glowing ring and an additional exhaust fan – Sigma HP 120 mm – located at the top. The RGB LED lighting is managed by the attached Aurora Sync PWM RGB, which provides 6 slots for fans and 6 for RGB devices. It allows you to control the fans speed thanks to PWM signal coming from the motherboard, also when 3-pin (non-PWM) fans are connected. It is also available to sync the lighting with another components such as motherboard, RAM modules and GPU.

LED RGB lighting system
The set of four Corona HP RGB 120 mm fans, perfectly visible thanks to the two tempered glass panels, are the basis of the lighting system in Armis AR6X TG RGB. Adjusting effects and colors using a dedicated button at the front of the case is possible thanks to included advanced Aurora Sync PWM RGB controller – with support for up to 6 RGB (12V) devices. The lighting system can be synced with compatible motherboard equipped with 4-pin RGB output. Such solutions are: ASRock Polychrome Sync, Asus Aura, EVGA RGB Header, Gigabyte RGB (4-pin RGB) and MSI Mystic Light.

Corona HP RGB 120 mm
Four Corona HP RGB 120 mm and one Sigma HP 120 mm fans included inside Armis AR6X TG RGB provide large amounts of airflow with three of them tastefully illuminating the glazed front as well. The fourth RGB fan is located at the rear.

Natissis structure
The SilentiumPC Armis AR6X TG RGB chassis utilizes a 391 mm long Natissis structure designed in Poland. The creators’ goal was to maximize space utilization within the standard size MIDI Tower constructions for ATX and E-ATX formats. The interior will fit graphics cards up to 360 mm long, and the CPU air cooling kits can have a maximum height of 162 mm. The most distinctive element of this segment is undoubtedly the possibility of installing radiators for integrated liquid cooling systems (AIO) not only at the front (120/140/240/280/360 mm), but also at the top of the case: 120/140/240/280 mm! Alternatively, the user can install up to 8 fans inside the chassis.

I/O Panel: 2× USB 3.2 Gen1
All the important ports and buttons at your fingertips – 2 × USB 3.2 Gen1, audio ports, POWER and RESET buttons, and finally, LED switch for lighting control.

Advanced Aurora Sync PWM RGB controller
The chassis is equipped with an advanced Aurora Sync PWM RGB controller, which allows to connect up to 6 fans to one FAN PWM output on the motherboard and – in this way - control their rotational speed depending on the CPU temperature or manually by the user. The PWM control is available even when 3-pin (non-PWM) fans are connected. Additionally, up to 6 RGB devices are supported so you can control their lighting.

Broad AIO LC compatibility
The Armis AR6X TG RGB chassis fits integrated liquid cooling systems (AIO). Their radiators can be: 120/140/240/280/360 (at the front), 120/140/240/280 (suspended under the top) or 120 mm (at the rear) long.

Full set of dust filters
In SilentiumPC Armis AR6X TG RGB, there are four intake dust filters included (two at front, one on top and another one under the PSU) to help fight off the dust and keep its interior clean. The users can install up to 8 fans inside the chassis.

Cable arrangement system
At the rear of the Natissis structure, on which the Armis AR6X TG RGB is based, there is a space behind the motherboard tray max. 29 mm deep with numerous – 24 pieces – cable tie hooks for better and more aesthetic cable management. It also has its own vents.

SilentiumPC Armis AR6X TG RGB. Form factor: Full Tower, Type: PC, Product colour: Black, Transparent. Power supply location: Bottom. Front fans installed: 3x 120 mm, Rear fans installed: 1x 120 mm, Fan speed: 0 - 1200 RPM. Supported HDD sizes: 2.5,3.5". Width: 221 mm, Depth: 443 mm, Height: 470 mm
Design
Form factorFull Tower
TypePC
MaterialMetal, Tempered glass
Product colourBlack, Transparent
Supported motherboard form factorsATX, EATX, micro ATX, Mini-ATX
Number of 3.5" bays2
Number of 2.5" bays2
Number of internal 3.5" bays2
Side windowY
Suitable forGaming
IlluminationY
Illumination colourMulti
Illumination locationCase fans
Tempered glass panel(s)Y
On/off buttonY
Maximum CPU cooler height16.2 cm
Maximum graphics card length36 cm
Maximum PSU length17.5 cm
Power supply
Power supply includedN
Power supply locationBottom
Ports & interfaces
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity2
Audio inputY
Audio outputY
Cooling
Front fans installed3x 120 mm
Rear fans installed1x 120 mm
Fan speed0 - 1200 RPM
Storage
Supported HDD sizes2.5,3.5"
HDD/SSD combo cageY
Number of HDDs supported4
Weight & dimensions
Width221 mm
Depth443 mm
Height470 mm
Weight7.05 kg
Packaging data
Package width504 mm
Package depth284 mm
Package height523 mm
Package weight8.31 kg
Other features
Cable management clearance2.9 cm
SPC258
5903018661230
Product colour
Black, Transparent
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity
2
Type
PC
Form factor
Full Tower
Supported motherboard form factors
ATX, EATX, micro ATX, Mini-ATX
Number of 3.5" bays
2
Power supply included
N
Supported HDD sizes
2.5,3.5"

SHIPMENTS

All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).

The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.

The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.

Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.

RIGHT OF WITHDRAWAL

To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Viale Cesare Pavese 267, 00144 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.

Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:

APPIEFFE GROUP SRL
Viale Cesare Pavese 267
00144 Rome

or at the email address info@trippodo.com or by fax at +39 06 99367459.

It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.

It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.

The refund will be made within 14 calendar days from the arrival of the object at our office.

NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.