EK Water Blocks EK QuanVector FE Water block
EK Water Blocks EK QuanVector FE, Water block, Acrylic, Aluminium, Cooper, Silver, 1/4", 3-pin, 28.5 mm
SADDYTECH CONSIGLIA TRIPPODO
VALIDO CON TRIPPODO PLUS
● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.
● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
iF Design Award Winner
EK-Quantum Vector FE Special Edition water blocks are the recipients of the renowned iF Design Award. The award-winning design encases the block in a 20mm thick aluminum exoskeleton that forms a cradle to embed the cooling and lighting, revealing only the most beautiful elements to the user. The distinctive PCB shape of the Founders Edition card posed a design challenge, but a terminal between the two prongs of the PCB solved the issue. The result is a unique and unprecedented GPU water block.
Special Edition EK Water Block for Nvidia FE GeForce RTX 3070 Ti
The EK-Quantum Vector FE RTX 3070 Ti D-RGB features a special PCB design just like its bigger brother, the RTX 3080 FE. The small form factor and unique shape of the RTX 3070 Ti Founders Edition PCB presented the same engineering challenge and was solved via a Special edition block.
The water block is purpose-designed with an extremely thick copper base for high-performance, allowing it to clear all components of the densely-packed PCB and adding more heat capacity in the process. The cooling engine used in this water block is the largest we've built to date, having roughly 30% more surface area than the rest of the Vector water blocks.
A Testament to the Build Quality
Like the Magnitude CPU water block, the entirety of this water block is CNC-machined without mass-production techniques. The block's base is milled out of a 12 mm thick piece of pure electrolytic copper sourced from Europe, which is then nickel-plated, while its top is CNC-machined out of a glass-like cast Acrylic material.
The external enclosure, which is not in any contact with the coolant, is machined out of a 20 mm thick solid piece of aluminum, which is afterward anodized into a gray color. The included single-slot I/O shield is supplied with special screws for attaching it to the aluminum enclosure in order to even out the entire water block's weight distribution. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure.
Cooling Engine
This Special Edition Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as cooling liquid is channeled right over these critical areas. The water block is in contact with MOSFETs and chokes to maximize cooling and minimize the chances of unwanted coil whine. The flow paths are optimized to reduce hydrodynamic instabilities and vortexing (dead spots) inside of them.
The integrated Open Split-Flow cooling engine design proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings and still achieve top performance.
The jet plate and fin structure geometry are optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. Fin array is populated by 31 microfins with 0.6 mm wide microchannels that provide exceptional cooling performance without unnecessary flow restrictions or clogging hazards.
Exclusive Backplate
This water block comes with an included backplate that makes sure the entire graphics card is enclosed and not at all visible. It also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM section. Due to the small size of the card and the block itself, the ribbed backplate boasts an increased surface area for additional passive cooling power. It's made of nickel-plated aluminum.
Special Terminal Design
The water block is delivered with a terminal featuring 6 G1/4" ports. Two direct G1/4" ports on the side, and four G1/4" ports going through it - two from the top, and two from the bottom.
The new design allows terminals to be directly attached to the copper cold plate of the GPU water block, making it more rigid and reducing the chances of damage. The terminal is neatly located between two prongs on the PCB, utilizing minimal space. This kind of design allows for incredible versatility, especially for Small Form Factor builds, and of course, more interesting aesthetics.
D-RGB Lighting on the EK-Quantum Vector FE RTX 3070 Ti D-RGB Water Block
This water block boasts a whopping 20 individually addressable D-RGB LEDs that illuminate both the water block's interior and the terminal itself. It is compatible with all popular RGB Sync technologies from major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header.
EK Water Blocks EK QuanVector FE. Type: Water block, Material: Acrylic, Aluminium, Cooper, Product colour: Silver. Width: 28.5 mm, Depth: 209.5 mm, Height: 97.5 mm. Cooling agent: liquid
| Features | |
| Type | Water block |
| Product colour | Silver |
| Connecting thread | 1/4" |
| Power connector | 3-pin |
| Weight & dimensions | |
| Width | 28.5 mm |
| Depth | 209.5 mm |
| Height | 97.5 mm |
| Other features | |
| Cooling agent | liquid |
- Type
- Water block
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.
