This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Cookie Policy.

      Alpenföhn Gletscherwasser 360 computer liquid cooling
      • Alpenföhn Gletscherwasser 360 computer liquid cooling
      • Alpenföhn Gletscherwasser 360 computer liquid cooling
      • Alpenföhn Gletscherwasser 360 computer liquid cooling
      • Alpenföhn Gletscherwasser 360 computer liquid cooling
      • Alpenföhn Gletscherwasser 360 computer liquid cooling

      Alpenföhn Gletscherwasser 360 computer liquid cooling

      Rif.: 84000000179
      Ean: 4250280316452

      Review (0)
      €201.33
      Tax included Shipping excluded Consegna entro 4 giorni lavorativi
      In Stock

      Alpenföhn Gletscherwasser 360, Processor, 17.8 dB, 23.5 dB, Fluid Dynamic Bearing (FDB), 3-pin + 4-pin, 3-pin

      Quantity :
      100% secure payments
      Close
      • Secure payments with PayPal, Credit Card and Bank Transfer
      • Worldwide shipping with UPS, Fedex, DPD, SDA and TNT
      • You can return the product within 30 days of purchase
      Alpenföhn is presenting with the “Gletscherwasser” a premium AIO- water cooling solution with addressable RGB lighting. This solution has been done in cooperation with the overclocking legend Roman „der8auer“ Hartung. Within the set, there are Wing Boost 3 ARGB fans as well as Thermal Grizzly Hydronaut heat transfer compound, offering a nice round package with superior thermal performance and silent operation. The exchangeable logo plate also enables individual designs. Gletscherwasser offers full compatibility with Ryzen 5000 / Zen 3. The final assembly of the water cooling solution is done in Germany!

      Pump

      The diamond ground Copper base plate of the pump unit possesses large area micro-channels to dissipate the waste heat of the CPU into the cooling circuit quickly and efficiently. Pump speeds between 1200 U/min and 2600U/min offer an extremely balanced performance spectrum for every aspect of your requirements. Decide yourself whether overclocking or virtual silence is on your mind. An intelligent cooling routing in a two-chamber design within the pump housing offers noise reduction whilst increasing performance and longevity in comparison to conventional designs. The finish of the injection moulded pump housing and cover is enriched by piano lacquer.

      Radiator

      Gletscherwasser contains an Aluminium high performance radiator. For enhanced safety within your system, the radiator uses a “leak-free” design. In the very unlikely case of a leak within the cooling system, the pressure inside the system is regulated to avoid any loss of coolant. Therefore your hardware is always SAFE.

      Heat Transfer Compound

      The included Thermal Grizzly Hydronaut paste with its excellent thermal conductivity can be used for normal as well as overclocking applications. It was developed specifically for large area applications as for example found in water cooling systems. Main advantages: No dry-out, silicone free and electrically insulating.

      Wing Boost 3 ARGB

      With its 16,8 million colours the Wing Boost 3 ARGB offers numerous possibilities to put your case into the right light. The addressable RGB LED lights are integrated into the fan housing and vaguely show the impeller as well as shine stylishly to the outside.

      Air flow optimized fan blades

      By means of a new blade angle the rotor has been optimized to lower speed in order to achieve in comparison with other fans a significantly higher volume flow, total pressure and exit speed at the same speed. Thanks to the Wing Boost 3 technology, air turbulence at the impeller is greatly reduced to ensure even quieter operation at full fan speed.

      IC motor control

      High-quality IC motor control minimizes electrical noise, especially in the low speed range, to a minimum.

      Fluid Dynamic Bearing

      By using the Fluid Dynamic bearing, we can realize a low-vibration and whisper-quiet operation of the fan.

      PWM speed control

      The new Wing Boost 3 supports speed control using the motherboard's PWM signal.

      De-vibration Pads

      The de-vibration rubbers reduce the often annoying noises, which are transmitted by the vibrations of the fan to the case, by their excellent anti-vibration characteristics to a minimum.

      Do it yourself!

      Realize your dream project with the included logo plates for the pump unit. All plates can be orientated freely on a 90° pattern. Do you require more creativity? The clear logo plate can be customized to your choice: Ideal for own logos, clan motives etc. Simply twist the bayonet cap on the pump head, swap the logo plate and close the cap. That’s all? Yes – Wow, that was easy.

      Alpenföhn Gletscherwasser 360. Purpose: Processor, Noise level: 17.8 dB, Fan noise level (max): 23.5 dB. Pump power consumption: 2.4 W, Pump voltage: 12 V, Pump current: 25 mA. Type: Internal, Water block material: Copper, Radiator material: Aluminium. Width: 75 mm, Depth: 26 mm, Height: 86 mm
      Performance
      PurposeProcessor
      Built-in fanY
      RadiatorY
      Noise level17.8 dB
      Fan noise level (max)23.5 dB
      Bearing technologyFluid Dynamic Bearing (FDB)
      Pulse-width modulation (PWM) supportY
      Pump connector3-pin
      Number of fans supported3
      Power
      Pump power consumption2.4 W
      Fan current0.57 A
      Design
      TypeInternal
      Fan controllerY
      Product colourBlack
      84000000179

      Data sheet

      Type
      Internal
      Purpose
      Processor
      Built-in fan
      Y
      Radiator
      Y
      Pulse-width modulation (PWM) support
      Y

      Specific References

      No customer reviews for the moment.

      Write your review
      Alpenföhn Gletscherwasser 360 computer liquid cooling

      16 other products in the same category:

      Alpenföhn Gletscherwasser 360 computer liquid cooling

      Alpenföhn Gletscherwasser 360 computer liquid cooling

      €201.33
      Tax included Shipping excluded Consegna entro 4 giorni lavorativi