EnGenius EWS330AP wireless access point 1267 Mbit s White Power over Ethernet (PoE)
zoom_out_map
chevron_left chevron_right
Out-of-Stock

EnGenius EWS330AP wireless access point 1267 Mbit/s White Power over Ethernet (PoE)

EnGenius EWS330AP, 1267 Mbit/s, 400 Mbit/s, 867 Mbit/s, 10,100,1000 Mbit/s, 5 GHz, IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11k, IEEE 802.11n, IEEE 802.11r

€162.99 Tax included

€133.60 Tax excluded

Shipping excluded
block Out-of-Stock
Paga in comode rate senza costi né interessi
/mese

Close
VALIDO CON TRIPPODO PLUS

● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.

● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
 
Provide Consistent Performance
The access point is designed with powerful RF interfaces to assure the reliability and strength of signal and sensitivity in a pervasive environment. The interfaces provide even coverage to help users reduce dead spots in their wireless configuration and boost received signal quality to deliver up to 1.26 Gbps throughput to wireless client devices.

Carry multimedia content using MU-MIMO and Beamforming technology
Being a AC1300 solution, the EWS330AP is not only built with powerful RF interfaces, but it also features MU-MIMO (Multi-Users Multiple input Multiple output). It also supports ransmit Beamforming (TxBF) technology. The significant improvement on 802.11ac wave 2 is MU-MIMO technology, which enhances the performance and transmission to wireless client devices. MU-MIMO allows multiple spatial streams to be used to different clients multaneously, which reduces latency, increases throughput, capacity and spectral efficiency of the wireless network. Transmit Beamforming (TxBF) is a standard in the 802.11ac wave 2 specification that allows access points to focus the energy of multiple antennas to transmit to a particular client device in the direction of that client. The innovative technology significantly enhances signal-to-noise ratio and creates a higher throughput to clients . With MU-MIMO and Beamforming technology, the EWS330AP indoor access points can bring more traffic to wireless client devices simultaneous over a longer distance and save time for serving other wireless client devices.

Simplifed Management and Configuraton over ezMaster or EWS Management Switch
EWS-series managed Access Points are designed to work with EWS-series Wireless Management Switches and ezMaster management platform for scalable and flexible wireless management applicatons. Whether you want to manage a few or up to 1000 Access Points and switches, on network in different locations, with different segments or 10 to 10,000 users, the EnGenius ezMaster platform makes these management and configurations simplifed for centralizing bulk configuration, provision and monitoring which means lower operating and
maintenance cost from a local or remote server or in the cloud. With a small scope or maximum of 50 clients a managed system is a requirement, the EWS management switches can perform auto discovery to search EWS managed Access Points. The administrator can easily use individual or cluster settings to fast deploy numbers of Access Points with desired settings, saving repetitive configuration tasks. If the connection to your ezMaster platform is lost SmartSync Redundancy will automatically store syslog and statistics from the APs. When the connection is re-established, all information will be re-synchronized and sent to ezMaster Management platform. Administrators will not miss any statistics and reports.

EnGenius EWS330AP. Maximum data transfer rate: 1267 Mbit/s, Maximum data transfer rate (2.4 GHz): 400 Mbit/s, Maximum data transfer rate (5 GHz): 867 Mbit/s. Security algorithms: 64-bit WEP, 128-bit WEP, 152-bit WEP, WPA, WPA-AES, WPA-EAP, WPA-TKIP, WPA2-Enterprise. AC input voltage: 12 V, Input current: 1 A. Placement: Ceiling, Product colour: White, LED indicators: System, WLAN. Width: 132.4 mm, Depth: 132.4 mm, Height: 22.4 mm
Caratteristiche
2.4 GHz
5 GHz
Velocità massima di trasferimento dati1267 Mbit/s
Velocità massima di trasferimento dati (2,4 GHz)400 Mbit/s
Velocità massima di trasferimento dati (5 GHz)867 Mbit/s
Velocità trasferimento Ethernet LAN10,100,1000 Mbit/s
Ampiezza banda5 GHz
Standard di reteIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11k, IEEE 802.11n, IEEE 802.11r
Scansione canale automatica
MIMO
Tipo MIMOMulti User MIMO
Modulazione16-QAM, 64-QAM, 256-QAM, BPSK, CCK, QPSK
Adatto alle funzioni della modalità APCollegamento in rete mesh
VLAN support
Caratteristiche della LAN virtualeTagged VLAN, SSID-based VLAN assignment
Sicurezza
Algoritmi di sicurezza supportati64-bit WEP, 128-bit WEP, 152-bit WEP, WPA, WPA-AES, WPA-EAP, WPA-TKIP, WPA2-Enterprise
Filtri MAC address
Connettività
Quantità porte Ethernet LAN (RJ-45)1
Jack DC-in
Gestione energetica
Supporto Power over Ethernet (PoE)
Tensione di ingresso AC12 V
Corrente d'ingresso1 A
Design
InstallazioneSoffitto
Colore del prodottoBianco
Tasto reset
Indicatori LEDSistema, WLAN
InternoNo
Dimensioni e peso
Larghezza132,4 mm
Profondità132,4 mm
Altezza22,4 mm
Condizioni ambientali
Range di umidità di funzionamento0 - 90%
Intervallo temperatura di funzionamento0 - 40 °C
Intervallo di temperatura-40 - 80 °C
Umidità0 - 90%
Dati logistici
Codice del Sistema Armonizzato (SA)85176990
ENGENIUS
EWS330AP
4713361933929
Product colour
White
Ethernet LAN (RJ-45) ports
1
2.4 GHz
Y
5 GHz
Y
Maximum data transfer rate
1267 Mbit/s
Power over Ethernet (PoE)
Y
Placement
Ceiling

SHIPMENTS

All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).

The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.

The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.

Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.

RIGHT OF WITHDRAWAL

To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.

Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:

APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome

or at the email address info@trippodo.com or by fax at +39 06 99367459.

It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.

It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.

The refund will be made within 14 calendar days from the arrival of the object at our office.

NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.