SilentiumPC Vero L3 Bronze power supply unit 500 W 24-pin ATX ATX Black
SilentiumPC Vero L3 Bronze, 500 W, 220 - 240 V, 50 Hz, 4 A, Active, 97 W
VALIDO CON TRIPPODO PLUS
● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.
● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
The high performance of the Vero L3 500 W Bronze is the result of using proven high-end components, previously known rather from higher segments. Its basis are DC-DC converters as well as Taiwanese electrolytic and aluminum-polymer (solid state) Teapo capacitors, all certified to operate at temperatures up to 105⁰C.
The Vero L3 500 W ATX computer power supply means very high efficiency, confirmed by 80 PLUS® Bronze 230V certificate, modern and efficient DC-DC converters, extremely powerful single +12 V line, very quiet operation in a large load range, as well as a rich set of black, flat wiring. Confirmation of its high quality is a 3-year warranty in a convenient door-to-door system.
80 PLUS® Bronze certificate
The high efficiency of the Vero L3 500 W has been confirmed by the 80 PLUS® Bronze certificate. The measured efficiency of the power supply meets the requirements of the standard with a great deal: about 87% at 20% load, ~ 89% at 50% and over 88% at a demand equal to the maximum power of the power supply.
Quiet Sigma HP 120 fan
High efficiency means not only lower energy bills, but also less heat generated, and thus lower temperatures inside the power supply and its quieter operation. Thanks to this, a thermally controlled Sigma HP 120 mm fan with HBS bearing can operate at a very low speed (up to 750 RPM) up to half the rated power of the Vero L3 500 W modular power supply. However, even at higher demand the fan does not spin above 1000 RPM: up to about 450 W. Thus, the noise generated by the fan is clearly quieter than in the previous family of Vero L2 / M2 power supplies.
Powerful +12 V line for modern processors and graphics cards
One powerful +12 V line allows great freedom in computer configuration, regardless of whether it is to be a set for the gamer – with a balanced load generated by the processor and graphics card - or a workstation with an above-average performance and a demanding CPU. The Vero L3 500 W is able to provide 492 W on a +12 V line on a continuous basis.
Wide array of protections
The security of the Vero L3 500 W and components it is powering is supervised by a full set of protections, such as short circuit protection (SCP), overload protection (OVP), against too low (UVP) or high (OVP) voltage or against inrush currents.
Black flat cabling with rich set of connectors
The Vero L3 500 W power supply has an elegant, Pure Black finish and comfortable, flat ribbon cable harnesses that allow easy distribution of wires inside the case while improving air circulation. The set of cables and connectors includes 8-pin EPS (4 + 4) cable for the processor and double PCI-E 8-pin (2 × 6 + 2) for a high-performance graphics card.
Short, 14 cm casing
The total depth of Vero L3 500 W is 140 mm, which significantly facilitates the arrangement of cabling in chassis with a small amount of space in the lower chamber and behind the motherboard tray.
SilentiumPC Vero L3 Bronze. Total power: 500 W, AC input voltage: 220 - 240 V, AC input frequency: 50 Hz. Motherboard power connector: 24-pin ATX, Motherboard power cable length: 57 cm, SATA power cable length: 500 mm. Power supply unit (PSU) form factor: ATX, 80 PLUS certification: 80 PLUS Bronze. Product colour: Black, Cooling type: Active, Fan diameter: 12 cm. Weight: 1.68 kg
| Power | |
| Total power | 500 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Input current | 4 A |
| Power Factor Correction (PFC) type | Active |
| Combined power (+3.3V) | 97 W |
| Combined power (+12V) | 492 W |
| Combined power (+5V) | 97 W |
| Combined power (-12V) | 3.6 W |
| Combined power (+5Vsb) | 12.5 W |
| Max output current (+3.3V) | 15 A |
| Max output current (+12V) | 41 A |
| Max output current (+5V) | 15 A |
| Max output current (-12V) | 0.3 A |
| Max output current (+5Vsb) | 2.5 A |
| Power protection features | Over power, Over voltage, Short circuit, Under voltage |
| Ports & interfaces | |
| Motherboard power connector | 24-pin ATX |
| Motherboard power cable length | 57 cm |
| Number of SATA power connectors | 7 |
| SATA power cable length | 500 mm |
| Peripheral (Molex) power connectors (4-pin) | 2 |
| EPS power connector (8-pin) | Y |
| PCI Express power cable length | 55 cm |
| Performance | |
| Power supply unit (PSU) form factor | ATX |
| 80 PLUS certification | 80 PLUS Bronze |
| ATX version | 2.31 |
| EPS version | 2.92 |
| Design | |
| Product colour | Black |
| Cooling type | Active |
| Fan diameter | 12 cm |
| Number of fans | 1 fan(s) |
| Weight & dimensions | |
| Weight | 1.68 kg |
| Packaging data | |
| Package width | 275 mm |
| Package depth | 247 mm |
| Package height | 92 mm |
| Package weight | 2.22 kg |
| Logistics data | |
| Harmonized System (HS) code | 84733020 |
- Total power
- 500 W
- AC input voltage
- 220 - 240 V
- Motherboard power connector
- 24-pin ATX
- Peripheral (Molex) power connectors (4-pin)
- 2
- Power supply unit (PSU) form factor
- ATX
- 80 PLUS certification
- 80 PLUS Bronze
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.
