Thermaltake Versa J25 TG RGB Midi Tower Black
Thermaltake Versa J25 TG RGB, Midi Tower, PC, Black, ATX, micro ATX, Mini-ITX, SPCC, Case fans, Front
SADDYTECH CONSIGLIA TRIPPODO
VALIDO CON TRIPPODO PLUS
● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.
● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
Designed for PC builders who want a sleek, custom looking case with great airflow and a crystal clear tempered glass panel – the Versa J25 is the ultimate mid-tower. This special RGB version comes with three 120mm 12V RGB front fans that are dual-mode controllable either through the front I/O panels, or by connecting to compatible Asus Gigabyte, MSI, ASRock or Biostar motherboards. The J25 supports a huge range of air and liquid cooling hardware, high-end GPUs and even a handy PSU cover in the basement.
3 Built-in 120mm 12V RGB Fans
Versa J25 TG RGB is preinstalled with three 120mm 12V RGB fans that can be controlled using a simple interface built into the I/O panel that cycles through three different lighting modes and a range of different color options.
Sync with Motherboard RGB Software
Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED, and BIOSTAR Vivid LED DJ, the included 12V RGB front fans allow you to control the lighting modes through your motherboard software. Visit the support page for motherboard information or to download the software:
Built-in RGB Switch Board
Thanks to the built-in RGB switch board, V200 TG RGB is able to deliver the ultimate RGB lighting customization through the I/O port RGB button or the synchronization with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED and BIOSTAR Vivid LED DJ -enabled motherboards.
Built-in PSU Cover
The J25 RGB edition is equipped with a full-length PSU cover with vent hole design to hide those unsightly cables from view and give your build a clean and tidy look.
Tempered Glass Window
The left tempered glass window is designed to slide into place and can be attached firmly with two screws at the rear panel, this 4mm tempered glass panel is more durable and shows much less wear and tear than older acrylic panels.
Tool-Free Installation
The included hard drive bays suit 3.5” and 2.5” bays, the chassis comes with expansion slots above and below the PSU shroud as well as behind the back panel, meaning you have space for up to seven drives. 3.5” or 2.5” HDD Drive Compatible
Superior Hardware Support
Build the system of your dreams with support for a tower CPU cooler with a maximum height of 160mm, a dual expansion slot VGA of up to 330mm in length, and a power supply with length of up to 160mm.
Excellent Cooling Capability
The J25 comes with three 12V RGB fans in the front and one standard 120mm exhaust fan but can also support two 120 or 140mm fans at the top. If you prefer liquid cooling, the front panel can house up to a 360mm radiator.
Angular, Acrylic Front Panel
The front panel of the Versa J25 has a centre acrylic strip that highlights any RGB fans you build into the system, while the vented grills on either side gives plenty of airflow to your components.
Handy I/O Ports
The top-front panel features two USB 3.0 data transfer ports to grant easy access when needed.
Thermaltake Versa J25 TG RGB. Form factor: Midi Tower, Type: PC, Product colour: Black. Front fans installed: 3x 120 mm, Front fans diameters supported: 120,140 mm, Rear fans installed: 1x 120 mm. Supported HDD sizes: 2.5,3.5". Width: 206 mm, Depth: 402 mm, Height: 461 mm. Tempered glass panel thickness: 4 mm
| Design | |
| Form factor | Midi Tower |
| Type | PC |
| Material | SPCC |
| Product colour | Black |
| Supported motherboard form factors | ATX, micro ATX, Mini-ITX |
| Number of 3.5" bays | 3 |
| Number of 2.5" bays | 2 |
| Number of expansion slots | 7 |
| Side window | Y |
| Illumination | Y |
| Illumination location | Case fans, Front |
| Tempered glass panel(s) | Y |
| Maximum CPU cooler height | 16 cm |
| Maximum graphics card length | 33 cm |
| Maximum PSU length | 16 cm |
| Power supply | |
| Power supply included | N |
| Ports & interfaces | |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 2 |
| Audio input | Y |
| Audio output | Y |
| Cooling | |
| Front fans installed | 3x 120 mm |
| Number of front fans supported (max) | 3 |
| Front fans diameters supported | 120,140 mm |
| Rear fans installed | 1x 120 mm |
| Number of rear fans supported (max) | 1 |
| Rear fans diameters supported | 120 mm |
| Number of top fans supported (max) | 2 |
| Top fans diameters supported | 120,140 mm |
| Fan speed | 0 - 1000 RPM |
| Storage | |
| Supported HDD sizes | 2.5,3.5" |
| Number of HDDs supported | 3 |
| Weight & dimensions | |
| Width | 206 mm |
| Depth | 402 mm |
| Height | 461 mm |
| Weight | 6.2 kg |
| Other features | |
| Tempered glass panel thickness | 4 mm |
- Product colour
- Black
- USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity
- 2
- Type
- PC
- Form factor
- Midi Tower
- Supported motherboard form factors
- ATX, micro ATX, Mini-ITX
- Number of 3.5" bays
- 3
- Power supply included
- N
- Supported HDD sizes
- 2.5,3.5"
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.
