Silverstone SST-RM41-506 computer case Rack
zoom_out_map
chevron_left chevron_right
PLUS

Silverstone SST-RM41-506 computer case Rack

Silverstone SST-RM41-506, Rack, Server, ATX, CEB, micro ATX, Mini-ITX, SGCC, 4U, 14.8 cm

€232.99 Tax included

€190.98 Tax excluded

Shipping excluded
DELIVERY WITHIN 4 WORKING DAYS (Saturdays and Sundays excluded) Orders placed after 1pm will be processed the next day.
check Available
Paga in comode rate senza costi né interessi
/mese

Close
SADDYTECH CONSIGLIA TRIPPODO

VALIDO CON TRIPPODO PLUS

● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.

● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
 
Distinctive exterior

Distinctive front panel features a handle design allowing for easy accessibility to the internal components, along with two USB 3.0 data transfer ports

Storage device performance

Supports optional 5.25” storage devices: FS204, FP510, FS305, FS305-12G

Storage bays

Offers users a wide range of hard drive options including support for 5.25"/3.5"/2.5" hard drives and slim optical drives

Internal configurations

- Length limitation: 7.87” (200mm)
- Supports ATX (PS2) / Mini Redundant
- Supports up to SSI-CEB (12" x 10.5") motherboards

Cooling capabilities

Utilizing the typical front-to-back directional airflow, RM41-506 comes pre-installed with two 80mm PWM fans for exhaust, designed to achieve a rapid heat dissipation effect that does not easily accumulate hot air inside

Sliding rail compatibility

Reserved mounting holes for sliding rails which can be easily installed. Can be used with the RMS06-22 rail

Silverstone SST-RM41-506. Form factor: Rack, Type: Server, Supported motherboard form factors: ATX, CEB, micro ATX, Mini-ITX. Supported power supply form factors: ATX, PS2. Front fans diameters supported: 80 mm, Rear fans installed: 2x 80 mm. Width: 430 mm, Depth: 446 mm, Height: 176 mm
Design
Fattore di formaSupporto
TipoServer
MaterialiSGCC
Fattore di forma scheda madre supportatoATX, CEB, micro ATX, Mini-ITX
Numero di vani per drive 5.25"6
Numero di attacchi da 2.5"3
Numero di vani per drive interni 3.5"4
Numero di attacchi da 5.25" esterni6
numero di slot espansivi7
Montaggio rack
Capacità di rack4U
Pulsante on/off
Indicatori LED
Altezza massima dissipatori CPU14,8 cm
Alimentazione
Fattori di forma di alimentazione supportatiATX, PS2
Connettività
Quantità di porte USB 3.2 Gen 1 (3.1 Gen 1) di tipo A2
Raffreddamento
Diametro delle ventole frontali supportato80 mm
Rear fans installed2x 80 mm
Dimensioni e peso
Larghezza430 mm
Profondità446 mm
Altezza176 mm
Peso9,7 kg
Spessore del materiale1,2 mm
Dati logistici
Codice del Sistema Armonizzato (SA)84733080
SST-RM41-506
4710007229224
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity
2
Type
Server
Form factor
Rack
Supported motherboard form factors
ATX, CEB, micro ATX, Mini-ITX
Number of 3.5" bays
4
Number of 5.25" bays
6

SHIPMENTS

All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).

The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.

The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.

Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.

RIGHT OF WITHDRAWAL

To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.

Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:

APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome

or at the email address info@trippodo.com or by fax at +39 06 99367459.

It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.

It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.

The refund will be made within 14 calendar days from the arrival of the object at our office.

NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.