Cooler Master MWE 750 Bronze V2 power supply unit 750 W 20+4 pin ATX ATX Black
Cooler Master MWE 750 Bronze V2, 750 W, 100 - 240 V, 50 - 60 Hz, 6 - 10 A, Active, 120 W
SADDYTECH CONSIGLIA TRIPPODO
VALIDO CON TRIPPODO PLUS
● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.
● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
The MWE Bronze offers a simple, reliable way to power your mid-range system safely and efficiently. The 80 PLUS Bronze efficiency rating, DC-to-DC circuit design, discrete cables, silent mode, and 120mm HDB fan offer a power supply unit that's solid in features and performance while remaining simple. This PSU will handle all your core computing needs with none of the hassles or challenges of additional specialty features, software synchronization, or other bells and whistles. Just plug the cables you need into your components and get to work. For a great computing experience, you can’t go wrong with the MWE Bronze.
80 PLUS Bronze Efficiency
The efficiency of your power supply unit is important because it directly affects you system’s performance and your power bill. The efficiency rating does not reflect the quality or reliability of a PSU. It only reflects the unit’s ability to move power from the wall to your components. The higher a PSU’s efficiency is, the lower the total amount of power it needs to power your system. The MWE Bronze series has an 80 PLUS Bronze efficiency rating, meaning it has a guaranteed typical efficiency of 85%.
DC-to-DC Circuit Design
Power comes in multiple voltage levels. The wall delivers power in one voltage level but your components each need a specific voltage to operate properly. The process of converting raw power from the wall to the multiple voltage levels your parts need requires special components to complete this process quickly, efficiently, and safely. The MWE Bronze’s DC-to-DC + LLC technology was painstakingly crafted to accomplish this goal. The Dual Forward circuit layout has been designed to convert 12V power to 3V and 5V levels with minimal ripple noise, 80 PLUS Bronze efficiency, and reduced risk to your connected hardware.
Active Power Factor Correction
The many processes required by a power supply unit in order to take power directly from the wall or other fixed power source, convert it to the correct output required by the connected components, and then distribute that power to said components safely can be full of risks. This is why it’s important for a PSU to have the right protections and regulations to ensure this process runs correctly.
The MWE Bronze’s Active Power Factor Correction uses a specialized circuit to correct power factor, leading to reduced total harmonics, corrected AC input voltage, and increased overall efficiency output.
120mm HDB Fan
The constant struggle between cooling and noise is as old as the consumer PC industry itself. Keeping your components cool without having to hear about it while you work is still one of the greatest challenges for all fan based cooling technologies. The MWE Bronze tackles this problem with a 120mm HDB fan. The hydro dynamic fan bearing creates less friction, making it great for low RPM operations. This technology keeps the fan running smoothly and efficiently for longer, keeping the noise level down and extending the lifespan of the PSU.
Silent Mode
The MWE Bronze platform has a built in silent mode for low wattage operation. While your system is in standby mode or running at loads lower than 50W, the fan will not spin. This ensures complete silence during casual operation. Once your system passes the 50W load threshold, the 120mm HDB fan will activate automatically and cool the unit appropriately based on system use and needs.
Flat, Black Cables
For many PC Builders with aesthetics in mind, cabling can be on of the most troublesome parts of assembling a PC. Cables can be confusing, too short or too long, and they almost never look good. The MWE Bronze uses flat and flexible black cables to help deal with these problems. These cables are more discrete and flexible, making them easier to implement into your system while taking up less space. This is especially useful for smaller cases and preserving airflow.
Cooler Master MWE 750 Bronze V2. Total power: 750 W, AC input voltage: 100 - 240 V, AC input frequency: 50 - 60 Hz. Motherboard power connector: 20+4 pin ATX, Motherboard power cable length: 61 cm, SATA power cable length: 500,620,740,860,980 mm. Purpose: PC, Power supply unit (PSU) form factor: ATX, 80 PLUS certification: 80 PLUS Bronze. Product colour: Black, Cooling type: Active, Fan diameter: 12 cm. Width: 150 mm, Depth: 140 mm, Height: 86 mm
Gestione energetica | |
Potenza totale | 750 W |
Tensione di ingresso AC | 100 - 240 V |
Frequenza di ingresso AC | 50 - 60 Hz |
Corrente d'ingresso | 6 - 10 A |
Tipo di correttore del fattore di potenza (PFC) | Attivo |
Potenza combinata (+3.3V) | 120 W |
Potenza combinata (+12V) | 750 W |
Potenza combinata (+5V) | 120 W |
Potenza combinata (-12V) | 3,6 W |
Potenza combinata (+5Vsb) | 15 W |
Corrente massima di uscita (+3.3V) | 20 A |
Corrente massima di uscita (+12V) | 62,5 A |
Corrente massima di uscita (+5V) | 20 A |
Corrente massima di uscita (-12V) | 0,3 A |
Corrente massima di uscita (+5Vsb) | 3 A |
Efficienza | 85% |
Funzionalità di protezione dell'alimentazione | Sovralimentazione, Sovraccarico, Surriscaldamento, Cortocircuito, Sotto carico |
Connettività | |
Connettore scheda madre | 20+4 pin ATX |
Lunghezza del cavo di alimentazione della scheda madre | 61 cm |
Numero di connettori SATA | 8 |
Lunghezza del cavo di alimentazione SATA | 500,620,740,860,980 mm |
Connettori periferiche (Molex) (4-pin) | 4 |
Lunghezza del cavo di alimentazione della periferica (Molex) | 500,620,740,860 mm |
Connettore di potenza EPS (8-Pin) | Sì |
Connettori PCI Express (6+2 pin) | 4 |
Prestazione | |
Utilizzo | PC |
Fattore di forma dell'unità di alimentazione (PSU) | ATX |
Certificazione 80 PLUS | 80 PLUS Bronze |
Fattore di forma scheda madre supportato | ATX |
Versione ATX | 2.52 |
Modalità silenzioso | Sì |
Tecnologia dei cuscinetti | HDB |
Tempo medio tra guasti (MTBF) | 100000 h |
Certificazione | ErP 2014 Lot 3, CCC, CE, TUV-RH, RCM, EAC, cTUVus, FCC, BSMI, KC, CB |
Design | |
Colore del prodotto | Nero |
Tipo di raffreddamento | Attivo |
Diametro del ventilatore | 12 cm |
Numero di ventole | 1 ventola(e) |
Velocità ventole | 0 - 2400 Giri/min |
Condizioni ambientali | |
Intervallo temperatura di funzionamento | 0 - 40 °C |
Dimensioni e peso | |
Larghezza | 150 mm |
Profondità | 140 mm |
Altezza | 86 mm |
Peso | 1,79 kg |
Dati su imballaggio | |
Larghezza imballo | 260 mm |
Profondità imballo | 190 mm |
Altezza imballo | 110 mm |
Peso dell'imballo | 2,2 kg |
Dati logistici | |
Quantità per pallett | 32 pz |
Larghezza scatola principale | 570 mm |
Lunghezza del cartone principale | 275 mm |
Altezza scatola principale | 215 mm |
Codice del Sistema Armonizzato (SA) | 84733020 |
Quantità per cartone principale | 5 pz |
Altre caratteristiche | |
Livello del rumore (modalità silenzioso, <30%) | 12,16 dB |
Livello del rumore (modalità di riposo, 50%) | 17,9 dB |
Livello del rumore (modalità a pieno regime, 100%) | 39,8 dB |
- Purpose
- PC
- Total power
- 750 W
- AC input voltage
- 100 - 240 V
- Motherboard power connector
- 20+4 pin ATX
- Peripheral (Molex) power connectors (4-pin)
- 4
- Power supply unit (PSU) form factor
- ATX
- 80 PLUS certification
- 80 PLUS Bronze
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.