Enermax REVOLUTION D.F. power supply unit 850 W 24-pin ATX ATX Black
Enermax REVOLUTION D.F., 850 W, 100 - 240 V, 825 W, 47 - 63 Hz, 12/6 A, 12 A
The choice to use only 100% Japanese 105°C electrolytic capacitors ensures the high build quality and a longlasting product. Based on an advanced DC-to-DC circuit the power supply is capable of delivering a perfect voltage regulation and very stable power output. The built-in SAC (Smart Airflow Control) design keeps the PSU fan spinning at 400 RPM upto 70% load for a almost inaudible operation. REVOLUTION D.F. is designed for high-performance gaming systems requiring high standards in quality and performance.
Efficiency
Up to 92% efficiency at 230VAC between 20 and 100% load. The REVOLUTION D.F. series is 80PLUS Gold certified.
REVOLUTION D.F. helps systems to meet the EU eco-design directive 2013 ErP Lot 6 and 2014 ErP Lot 3 (< 0.5W in standby mode) due to a high-efficient 5V standby (+5Vsb) circuitry. Moreover it supports the EU regulation no. 617/2013 demanding amongst others 85% efficiency at 50% load and 82% at 20% and 100% load.
Power
The DC-to-DC design generates the secondary voltages (+5V and +3.3V) from the primary voltage rail (+12V). The positive effect is higher efficiency, clean output voltages (low ripple noise) and a perfect voltage regulation at all loads.
At least four 6+2P (8P) PCI-E connectors ensure power for multi-GPU systems (MGPU & SLI) and overclocked processors.
A multi-rail design with four 12V rails distributes the power with maximum stability and safety.
Connectivity
The fully modular Flat cable management allows an easy system installation and cable routing and improves the air circulation inside the case.
Extended 70cm CPU connector cable for installation in large cases.
Cooling
The integrated 13.9cm Enermax fan with patented Twister Bearing technology ensures an efficient and continuously silent cooling and long lifetime with up to 160,000 hours MTBF.
The patented technology DFR (Dust Free Rotation) reduces the dust accumulation on the fan blades.
After starting the PSU, the fan spins in reverse at full speed for a few seconds removing dust.
Afterwards it returns to normal operation.
Smart Airflow Control
The SAC (Smart Airflow Control) design keeps the PSU fan spinning at almost inaudible 400 RPM upto 70% load to provide the optimal silent experience.
D.F. Switch
The D.F Switch is placed at the back of the PSU and allows manual activativation of the DFR funktion. The D.F. Switch turns the fan immediately into backspin, removing accumulated dust. Regular use of the DFR funktion can help to reduce dust accumulation and prolong the lifespan of the product.
Compatibility
Intel ATX12V v2.4, compliant with the Intel Power Supply Design Guide for Desktop Platform Form Factors Revision 1.31 April 2013.
Full support of the C6/C7 energy-saving functions of Intel processors, first introduced with the Haswell generation.
Worldwide compatibility with automatic 100-240VAC input and up to 0.99 with active Power Factor Correction (PFC).
Enermax REVOLUTION D.F.. Total power: 850 W, AC input voltage: 100 - 240 V, Peak power: 825 W. Motherboard power connector: 24-pin ATX, Motherboard power cable length: 60 cm, SATA power cable length: 450,600,750,900 mm. Purpose: PC, Power supply unit (PSU) form factor: ATX, 80 PLUS certification: 80 PLUS Gold. Product colour: Black, Fan diameter: 13.9 cm, Number of fans: 1 fan(s). Cables included: AC
Gestione energetica | |
Potenza totale | 850 W |
Potenza di picco | 825 W |
Tensione di ingresso AC | 100 - 240 V |
Frequenza di ingresso AC | 47 - 63 Hz |
Corrente d'ingresso | 12/6 A |
Corrente di ingresso massima (@110V) | 12 A |
Corrente di ingresso massima (@220V) | 6 A |
Fattore di potenza | 0,99 |
Tipo di correttore del fattore di potenza (PFC) | Attivo |
Potenza combinata (+3.3V) | 120 W |
Potenza combinata (+12V) | 850 W |
Potenza combinata (-12V) | 3,6 W |
Potenza combinata (+5Vsb) | 12,5 W |
Corrente massima di uscita (+3.3V) | 22 A |
Corrente massima di uscita (+12V1) | 25 A |
Corrente massima di uscita (+12V2) | 25 A |
Corrente massima di uscita (+12V4) | 40 A |
Corrente massima di uscita (+5V) | 22 A |
Corrente massima di uscita (-12V) | 0,3 A |
Corrente massima di uscita (+5Vsb) | 2,5 A |
Efficienza | 91,8% |
Funzionalità di protezione dell'alimentazione | Fusibile di ingresso, Sovracorrente, Sovralimentazione, Sovraccarico, Surriscaldamento, Cortocircuito, Sotto carico |
Connettività | |
Connettore scheda madre | 24-pin ATX |
Lunghezza del cavo di alimentazione della scheda madre | 60 cm |
Numero di connettori SATA | 12 |
Lunghezza del cavo di alimentazione SATA | 450,600,750,900 mm |
Connettori periferiche (Molex) (4-pin) | 4 |
Lunghezza del cavo di alimentazione della periferica (Molex) | 450,600,750,900 mm |
Connettori PCI Express (6+2 pin) | 6 |
Connettore di potenza CPU (4+4-Pin) | Sì |
Lunghezza del cavo di alimentazione CPU | 70 cm |
Connettore floppy disc | Sì |
Prestazione | |
Utilizzo | PC |
Fattore di forma dell'unità di alimentazione (PSU) | ATX |
Certificazione 80 PLUS | 80 PLUS Gold |
Versione ATX | 2.4 |
Certificazione | CE, TUV, cTUVus, FCC, BSMI, CCC, EAC, RCM, KCC |
Design | |
Colore del prodotto | Nero |
Diametro del ventilatore | 13,9 cm |
Numero di ventole | 1 ventola(e) |
Dimensioni e peso | |
Larghezza | 160 mm |
Profondità | 150 mm |
Altezza | 86 mm |
Peso | 3 kg |
Dati su imballaggio | |
Manuale dell'utente | Sì |
Larghezza imballo | 248 mm |
Profondità imballo | 233 mm |
Altezza imballo | 96,5 mm |
Peso dell'imballo | 3,8 kg |
Dati logistici | |
Codice del Sistema Armonizzato (SA) | 84733020 |
Altre caratteristiche | |
Viti incluse | Sì |
Fascette fermacavo incluse | Sì |
Livello del rumore (modalità silenzioso, <30%) | 10,5 dB |
Livello del rumore (modalità di riposo, 50%) | 10,5 dB |
Livello del rumore (modalità a pieno regime, 100%) | 23,4 dB |
- Purpose
- PC
- Total power
- 850 W
- AC input voltage
- 100 - 240 V
- Motherboard power connector
- 24-pin ATX
- Peripheral (Molex) power connectors (4-pin)
- 4
- Power supply unit (PSU) form factor
- ATX
- 80 PLUS certification
- 80 PLUS Gold
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.