APC SMT3000RMI2UC uninterruptible power supply (UPS) Line-Interactive 3 kVA 2700 W 9 AC outlet(s)
APC SMT3000RMI2UC, Line-Interactive, 3 kVA, 2700 W, Sine, 151 V, 302 V
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Cold-start capable
Provides temporary battery power when the utility power is out.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency
Reduces utility costs, generates less heat.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Network manageable
Provides remote power management of the UPS over the network.
Outlet group control
Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Sequenced network shutdown and reboot
Customize network shutdown and reboot sequence of connected servers and UPSs.
Serial connectivity
Provides management of the UPS via a serial port.
Single switched outlet group
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
SmartConnect
Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services.
StruxureWare Data Center Expert compatible
Enables centralized management via StruxureWare Data Center Expert.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Wide input voltage range
Designed for harsh electrical environments to save battery life.
APC SMT3000RMI2UC. UPS topology: Line-Interactive, Output power capacity: 3 kVA, Output power: 2700 W. AC outlet types: C13 coupler, C19 coupler, Power plug: C20 coupler, AC outlets quantity: 9 AC outlet(s). Battery technology: Sealed Lead Acid (VRLA), Battery capacity: 547 VAh, Typical backup time at full load: 3.2 min. Form factor: Rackmount, Product colour: Black, Rack capacity: 2U. Width: 432 mm, Depth: 683 mm, Height: 86 mm
Caratteristiche | |
Topologia UPS | A linea interattiva |
Potenza in uscita | 3 kVA |
Potenza in uscita | 2700 W |
Forma d'onda | Sinusoidale |
Tensione operativa in entrata (min) | 151 V |
Tensione operativa in entrata (max) | 302 V |
Frequenza di ingresso | 50/60 Hz |
Tensione operativa di uscita (min) | 220 V |
Tensione di uscita (max) | 240 V |
Regolatore automatico di tensione (AVR) | Sì |
Valutazione sovraccarico energetico | 320 J |
Tempo di mantenimento (max) | 8 ms |
Efficienza | 98,9% |
Emissione acustica | 55 dB |
Allarmi sonori | Sì |
Riavvio automatico | Sì |
Connettività | |
Tipo di uscita AC | Accoppiatore C13, Accoppiatore C19 |
Presa di corrente | Accoppiatore C20 |
Quantità prese AC | 9 presa(e) AC |
Numero di jumpers uscita IEC | 3 |
Porta USB | Sì |
Interfaccia seriale | Sì |
Tipo interfaccia seriale | RJ-45 |
Quantità porte Ethernet LAN (RJ-45) | 1 |
SmartSlot | Sì |
Batteria | |
Tecnologia batteria | Acido piombo (VRLA) |
Capacità della batteria | 547 VAh |
Tempo di salvataggio minimo a pieno carico | 3,2 min |
Tempo di salvataggio minimo a mezzo carico | 11,5 min |
Durata della batteria (max) | 5 anno/i |
Tempo di ricarica | 3 h |
Batteria scambio a caldo | Sì |
test automatico batteria | Sì |
Partenza a freddo | Sì |
Design | |
Fattore di forma | Montaggio a rack |
Colore del prodotto | Nero |
Capacità di rack | 2U |
Lunghezza cavo | 2 m |
Tipo di display | LCD |
Indicatori LED | status |
Certificazione | CE, EAC, EN 60950, EN/IEC 62040-1, EN/IEC 62040-2, GS Mark, IRAM, RCM, VDE, WEEE, REACH, PEP, EOLI |
Condizioni ambientali | |
Intervallo temperatura di funzionamento | 0 - 40 °C |
Intervallo di temperatura | -15 - 45 °C |
Range di umidità di funzionamento | 0 - 95% |
Umidità | 0 - 95% |
Altitudine di funzionamento | 0 - 3000 m |
Altitudine di non-funzionamento | 0 - 15000 m |
Dimensioni e peso | |
Larghezza | 432 mm |
Profondità | 683 mm |
Altezza | 86 mm |
Peso | 44,3 kg |
Larghezza imballo | 600 mm |
Profondità imballo | 980 mm |
Altezza imballo | 254 mm |
Peso dell'imballo | 51,7 kg |
Dati su imballaggio | |
Kit di montaggio per rack | Sì |
Cavi inclusi | RS-232, Cavo USB |
Guida d'installazione rapida | Sì |
CD software | Sì |
Software forniti | Powershute Business Edition |
Dati logistici | |
Codice del Sistema Armonizzato (SA) | 85078000 |
Altre caratteristiche | |
Voltaggio nominale di entrata | 230 V |
- Product colour
- Black
- Form factor
- Rackmount
- Output power capacity
- 3 kVA
- Waveform
- Sine
- Input operation voltage (min)
- 151 V
- Input operation voltage (max)
- 302 V
- Input frequency
- 50/60 Hz
- UPS topology
- Line-Interactive
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.