PureTools PT-HDBT-1010 AV extender AV transmitter & receiver Black
zoom_out_map
chevron_left chevron_right
Out-of-Stock

PureTools PT-HDBT-1010 AV extender AV transmitter & receiver Black

PureTools PT-HDBT-1010, AV transmitter & receiver, 100 m, Wired, Black, HDCP

€700.99 Tax included

€574.58 Tax excluded

Shipping excluded
block Out-of-Stock
Paga in comode rate senza costi né interessi
/mese

Close
VALIDO CON TRIPPODO PLUS

● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.

● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
 
4K 18Gbps HDMI HDBaseT Extender Set
The HDMI via HDBaseT Spec 3 Extender Set PT-HDBT-1010 transmits HDMI signals with full 4K@60 4:4:4 resolution over a distance of up to 80 meters or with 4K@60 4:2:0 resolution up to 100 meters. The set supports HDMI version 2.0 with a max. bandwidth of 18Gbps incl. HDCP 2.2 / 1.4. Four USB-A "Device" ports and one USB-B "Host" port can be found on both the transmitter and the receiver. USB signals, e.g. for KVM, USB memory or monitoring hardware, can thus be integrated at both ends and connected to the processing PC at the other end. The DIP switch on both units can be used to switch between "Host" and "Device" mode. Another DIP switch on the receiver sets the ARC mode to "HDMI", S/PDIF" or "Pass-Through". The system enables bidirectional transmission (or pass-through) of PoH / PoC and Ethernet. Both devices can be controlled separately via RS232. Analogue stereo audio de-embedding is also available.

PureTools - Professional Electronic Products for Commercial Applications
The PT-HDBT-1010 4K 18Gbps HDMI HDBaseT Spec 3 Extender Set consists of transmitter (TX) and receiver (RX) and transmits incoming HDMI signals via HDBaseT. For this, both devices are connected with a conventional Cat. cable (Cat.5e / Cat.6a) over distances of up to 80 metres for 4K resolutions with max. 60Hz at 4:4:4 subsampling or up to 100 metres for 4K resolutions with max. 60Hz at 4:2:0 subsampling. An HDMI loop output is also provided on the transmitter for local output of the HDMI signal at the TX location.

Both units provide one USB-B and four USB-A connections. The USB-A "Device" ports offer the possibility of connecting USB 2.0 devices and transmitting their data to the other respective other device via HDBaseT, to which the processing "Host" PC is then connected via USB-B. This results in a number of possible scenarios for USB signal distribution, e.g. the connection of USB storage devices in a server room, which can be easily accessed from the respective host PC at the workstation or point of presentation. It is also possible to connect KVM devices, e.g. keyboard, mouse and webcam, for use with remote PCs. Hi-Speed" USB 2.0 is supported, which enables the integration of older and newer devices. Devices with USB 3.x or higher thus transmit with a maximum of 480Mbps USB 2.0 Hi-Speed data rate. Whether the transmitter or receiver operates in "host" or "device" mode can be easily set via DIP switches on both devices.

Another outstanding feature of the PT-HDBT-1010 is its versatile ARC compatibility, which enables connection to new and older audio devices such as AVRs. A total of three modes are available here, which can also be switched between very easily using a DIP switch. In "HDMI" mode, the ARC signal from the connected HDMI display on the receiver is converted into a compatible audio signal, then transmitted back to the transmitter via HDBaseT and output on the HDMI and optical S/PDIF / Toslink ports. In this mode, the forwarding of CEC signals is not supported. In "S/PDIF" mode, the ARC signal is routed from the S/PDIF input of the receiver to the HDMI and optical S/PDIF / Toslink ports and output from there. Since this does not use the CEC line of the display device, it is still available for CEC pass-through applications. In "Pass" or pass-through mode, the actual ARC signal is routed directly from the HDMI output port of the receiver to the HDMI and optical S/PDIF / Toslink connection of the transmitter in addition to CEC and can then be used by an ARC-capable audio device.

The system supports bidirectional PoC or PoH power supply. This means that only one of the two devices needs to be powered through the included power supply in order for the other device to also be powered via the HDBaseT Cat connection. This saves PSUs and keeps things tidy, thanks to less cabling in one of the two places.
The bi-directional pass-through of 1G Ethernet signals allows for easy Ethernet connectivity at the remote site without having to run another Cat cable.
Both units have an IR input and an IR output, each with two 3.5mm jack sockets. This allows the connected display unit to be controlled from the side of the source unit and vice versa. The system also supports CEC control data via HDMI, which is also transmitted via HDBaseT (except in ARC "HDMI" mode).
Both transmitter and receiver also feature a 3-pin Phoenix connector for control via RS232. Each unit can be controlled individually and locally; the RS232 control data is not transmitted via HDBaseT from one unit to the other.
A 3.5mm jack stereo connector is provided on the transmitter to de-embed the analogue stereo audio. This way, the audio signal from the HDMI input can be easily integrated into an existing audio system.
The 12V power connection of both units can be locked with a screw cap.
There are also several status LEDs on both units, which can be used to read the operating status, connection, HDCP version and loopout status, among other things.

PureTools - Professional Electronic Products for Commercial Applications
The PureTools product line is made up of high-quality audio / video electronic products such as matrices, switchers, splitters, converters and extenders for commercial AV installations and applications. The product line's focus is on the transmission of digital signals such as HDMI, DisplayPort, DVI, USB, HDBaseT and many more. Dependable technology designed according to the latest standards and combined with intelligent innovations, make the PureTools product line perfect for professional installers, as well as guaranteeing an "Install and Forget" experience thanks to top grade performance.

PureTools PT-HDBT-1010. Type: AV transmitter & receiver, Maximum transfer distance: 100 m, Bandwidth: 18 Gbit/s. Connectivity technology: Wired, USB connector type: USB Type-A, USB Type-B, Digital audio optical input type: TOSLINK. Operating voltage: 24 V, Output current: 1.25 A. Width: 100 mm, Depth: 200 mm, Height: 27 mm. Quantity per pack: 1 pc(s), Package width: 140 mm, Package depth: 230 mm
Caratteristiche
TipoTrasmettitore e ricevitore AV
Distanza massima di trasferimento100 m
Extended display identification data (EDID)
Bidirezionale
versione HDCP1.4/2.2
Colore del prodottoNero
CertificazioneCE, FCC, RoHS, REACH
Connettività
Tecnologia di connessioneCablato
Porte di ingresso RJ-453
Porte di uscita RJ-451
Porta HDBaseT
Versione HDMI2.0
Numero di USB5
Versione USB2.0
Connettore USBUSB tipo A, USB di tipo B
Tipo di ingresso audio-ottico digitaleTOSLINK
Uscita audio digitale ottico1
Remote (IR) output1
Gestione energetica
Tensione di esercizio24 V
Corrente d'uscita1,25 A
Condizioni ambientali
Umidità10 - 90%
Dimensioni e peso
Larghezza100 mm
Profondità200 mm
Altezza27 mm
Peso1,28 kg
Dati su imballaggio
Quantità per pacco1 pz
Larghezza imballo140 mm
Profondità imballo230 mm
Altezza imballo134 mm
Peso dell'imballo1,4 kg
Contenuto dell'imballo
Adattatore AC/DC
Manuale dell'utente
Kit di montaggio
PURETOOLS
PT-HDBT-1010
4251364727249
Type
AV transmitter & receiver
Connectivity technology
Wired

SHIPMENTS

All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).

The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.

The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.

Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.

RIGHT OF WITHDRAWAL

To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.

Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:

APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome

or at the email address info@trippodo.com or by fax at +39 06 99367459.

It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.

It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.

The refund will be made within 14 calendar days from the arrival of the object at our office.

NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.