Alpenföhn Gletscherwasser 360 Processor All-in-one liquid cooler Black
zoom_out_map
chevron_left chevron_right
Out-of-Stock

Alpenföhn Gletscherwasser 360 Processor All-in-one liquid cooler Black

Alpenföhn Gletscherwasser 360, All-in-one liquid cooler, 92.6 m³/h, Black

€183.49 Tax included

€150.40 Tax excluded

Shipping excluded
block Out-of-Stock
Paga in comode rate senza costi né interessi
/mese

Close
SADDYTECH CONSIGLIA TRIPPODO

VALIDO CON TRIPPODO PLUS

● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.

● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
 
Alpenföhn is presenting with the “Gletscherwasser” a premium AIO- water cooling solution with addressable RGB lighting. This solution has been done in cooperation with the overclocking legend Roman „der8auer“ Hartung. Within the set, there are Wing Boost 3 ARGB fans as well as Thermal Grizzly Hydronaut heat transfer compound, offering a nice round package with superior thermal performance and silent operation. The exchangeable logo plate also enables individual designs. Gletscherwasser offers full compatibility with Ryzen 5000 / Zen 3. The final assembly of the water cooling solution is done in Germany!

Pump

The diamond ground Copper base plate of the pump unit possesses large area micro-channels to dissipate the waste heat of the CPU into the cooling circuit quickly and efficiently. Pump speeds between 1200 U/min and 2600U/min offer an extremely balanced performance spectrum for every aspect of your requirements. Decide yourself whether overclocking or virtual silence is on your mind. An intelligent cooling routing in a two-chamber design within the pump housing offers noise reduction whilst increasing performance and longevity in comparison to conventional designs. The finish of the injection moulded pump housing and cover is enriched by piano lacquer.

Radiator

Gletscherwasser contains an Aluminium high performance radiator. For enhanced safety within your system, the radiator uses a “leak-free” design. In the very unlikely case of a leak within the cooling system, the pressure inside the system is regulated to avoid any loss of coolant. Therefore your hardware is always SAFE.

Heat Transfer Compound

The included Thermal Grizzly Hydronaut paste with its excellent thermal conductivity can be used for normal as well as overclocking applications. It was developed specifically for large area applications as for example found in water cooling systems. Main advantages: No dry-out, silicone free and electrically insulating.

Wing Boost 3 ARGB

With its 16,8 million colours the Wing Boost 3 ARGB offers numerous possibilities to put your case into the right light. The addressable RGB LED lights are integrated into the fan housing and vaguely show the impeller as well as shine stylishly to the outside.

Air flow optimized fan blades

By means of a new blade angle the rotor has been optimized to lower speed in order to achieve in comparison with other fans a significantly higher volume flow, total pressure and exit speed at the same speed. Thanks to the Wing Boost 3 technology, air turbulence at the impeller is greatly reduced to ensure even quieter operation at full fan speed.

IC motor control

High-quality IC motor control minimizes electrical noise, especially in the low speed range, to a minimum.

Fluid Dynamic Bearing

By using the Fluid Dynamic bearing, we can realize a low-vibration and whisper-quiet operation of the fan.

PWM speed control

The new Wing Boost 3 supports speed control using the motherboard's PWM signal.

De-vibration Pads

The de-vibration rubbers reduce the often annoying noises, which are transmitted by the vibrations of the fan to the case, by their excellent anti-vibration characteristics to a minimum.

Do it yourself!

Realize your dream project with the included logo plates for the pump unit. All plates can be orientated freely on a 90° pattern. Do you require more creativity? The clear logo plate can be customized to your choice: Ideal for own logos, clan motives etc. Simply twist the bayonet cap on the pump head, swap the logo plate and close the cap. That’s all? Yes – Wow, that was easy.

Alpenföhn Gletscherwasser 360. Type: All-in-one liquid cooler, Airflow: 92.6 m³/h. Width: 75 mm, Depth: 26 mm, Height: 86 mm. Product colour: Black
Prestazione
Ambiente di utilizzoProcessore
TipoRaffreddatore di liquidi tutto in uno
Socket Processori supportatiLGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1200 (Socket H5), LGA 1366 (Socket B), LGA 2011 (Socket R), LGA 2011-v3 (Socket R), LGA 2066, Socket AM2, Socket AM2+, Socket AM3, Socket AM3+, Socket AM4, Socket FM1, Socket TR4, Socket sTRX4
Flusso d'aria92,6 m³/h
Supporto per modulazione di larghezza di impulso (PWM)
Livello di rumore della ventola (max)23,5 dB
Tecnologia dei cuscinetti della ventolaCuscinetto fluido dinamico (FDB)
Connettore per pompa (di raffreddamento)3-pin
Pressione statica della ventola2,19 mmH2O
Design
Colore del prodottoNero
Materiali radiatoreAlluminio
Numero di ventole3 ventola(e)
Illuminazione a LED
colore d'illuminazioneBlu, Verde, Rosso
Connettore ventilatore3-pin + 4-pin
Materiale waterblockRame
Regolatore della ventola
Gestione energetica
Consumo energetico della pompa2,4 W
Corrente ventilatore0,57 A
Dimensioni e peso
Larghezza75 mm
Larghezza radiatore40,2 cm
Profondità radiatore2,7 cm
Altezza radiatore12 cm
Lunghezza tubo4,65 cm
Altezza86 mm
Dimensione della ventola (L x P x A)120 x 120 x 25 mm
Altre caratteristiche
Numero di ventole supportate3
Grasso termico
Emissione acustica17,8 dB
Dati logistici
Codice del Sistema Armonizzato (SA)84733080
84000000179
4250280316452
Product colour
Black
Suitable location
Processor

SHIPMENTS

All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).

The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.

The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.

Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.

RIGHT OF WITHDRAWAL

To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.

Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:

APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome

or at the email address info@trippodo.com or by fax at +39 06 99367459.

It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.

It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.

The refund will be made within 14 calendar days from the arrival of the object at our office.

NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.

16 other products in the same category: