Alpenföhn 84000000182 computer cooling system Processor All-in-one liquid cooler
Alpenföhn 84000000182, All-in-one liquid cooler, 132.4 m³/h
SADDYTECH CONSIGLIA TRIPPODO
VALIDO CON TRIPPODO PLUS
● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.
● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
The diamond ground Copper base plate of the pump unit possesses large area micro-channels to dissipate the waste heat of the CPU into the cooling circuit quickly and efficiently. Pump speeds between 1200 U/min and 2600U/min offer an extremely balanced performance spectrum for every aspect of your requirements. Decide yourself whether overclocking or virtual silence is on your mind. An intelligent cooling routing in a two-chamber design within the pump housing offers noise reduction whilst increasing performance and longevity in comparison to conventional designs. The finish of the injection moulded pump housing and cover is enriched by piano lacquer.
Radiator
Gletscherwasser contains an Aluminium high performance radiator. For enhanced safety within your system, the radiator uses a “leak-free” design. In the very unlikely case of a leak within the cooling system, the pressure inside the system is regulated to avoid any loss of coolant. Therefore your hardware is always SAFE.
Heat Transfer Compound
The included Thermal Grizzly Hydronaut paste with its excellent thermal conductivity can be used for normal as well as overclocking applications. It was developed specifically for large area applications as for example found in water cooling systems. Main advantages: No dry-out, silicone free and electrically insulating.
Wing Boost 3 ARGB
With its 16,8 million colours the Wing Boost 3 ARGB offers numerous possibilities to put your case into the right light. The addressable RGB LED lights are integrated into the fan housing and vaguely show the impeller as well as shine stylishly to the outside.
Air flow optimized fan blades
By means of a new blade angle the rotor has been optimized to lower speed in order to achieve in comparison with other fans a significantly higher volume flow, total pressure and exit speed at the same speed. Thanks to the Wing Boost 3 technology, air turbulence at the impeller is greatly reduced to ensure even quieter operation at full fan speed.
IC motor control
High-quality IC motor control minimizes electrical noise, especially in the low speed range, to a minimum.
Fluid Dynamic Bearing
By using the Fluid Dynamic bearing, we can realize a low-vibration and whisper-quiet operation of the fan.
PWM speed control
The new Wing Boost 3 supports speed control using the motherboard's PWM signal.
De-vibration Pads
The de-vibration rubbers reduce the often annoying noises, which are transmitted by the vibrations of the fan to the case, by their excellent anti-vibration characteristics to a minimum.
Extensive accessories
The included remote control allows the use of Gletscherwasser even in systems, which do not have connectors for addressable RGB components. The numerous effects, as well as speed and brightness of the Gletscherwasser and Wing Boost 3 ARGB can be controlled synchronously via remote control and receiver. All required cables as well as ARGB-splitter and PWM-splitter are included in the set.
Compatibility
All assembly material is of black colour, and the included parts offer stable mounting on the following sockets:
Intel® LGA: 1200, 1150, 1151, 1155, 1156, 1366, 2066, 2011-v3, 2011
AMD: TR4, sTRX4, AM4, AM3+, AM3, AM2+, AM2, FM1
Alpenföhn 84000000182. Type: All-in-one liquid cooler, Airflow: 132.4 m³/h
| Prestazione | |
| Ambiente di utilizzo | Processore |
| Tipo | Raffreddatore di liquidi tutto in uno |
| Socket Processori supportati | LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1200 (Socket H5), LGA 1366 (Socket B), LGA 2011 (Socket R), LGA 2011-v3 (Socket R), LGA 2066, Socket AM2, Socket AM2+, Socket AM3, Socket AM3+, Socket AM4, Socket FM1, Socket TR4, Socket sTRX4 |
| Flusso d'aria | 132,4 m³/h |
| Supporto per modulazione di larghezza di impulso (PWM) | Sì |
| Livello di rumore della pompa | 36,8 dB |
| Tecnologia dei cuscinetti della ventola | Cuscinetto fluido dinamico (FDB) |
| Connettore per pompa (di raffreddamento) | 3-pin |
| Pressione statica della ventola | 3,24 mmH2O |
| Design | |
| Materiali radiatore | Alluminio |
| Materiale della piastra di base | Rame |
| Illuminazione a LED | Sì |
| colore d'illuminazione | Multi |
| Connettore ventilatore | 4 piedini |
| Gestione energetica | |
| Consumo energetico delle ventole VRM | 3,84 W |
| Corrente ventilatore | 0,2 A |
| Dimensioni e peso | |
| Larghezza radiatore | 40,2 cm |
| Profondità radiatore | 2,7 cm |
| Altezza radiatore | 12 cm |
| Ampiezza dell'idroblocco | 12 cm |
| Profondità dell'idroblocco | 2,5 cm |
| Altezza dell'idroblocco | 12 cm |
| Larghezza della pompa | 8,6 cm |
| Profondità della pompa | 6,2 cm |
| Altezza della pompa | 7,5 cm |
| Altre caratteristiche | |
| Emissione acustica | 17,8 dB |
| Dati logistici | |
| Codice del Sistema Armonizzato (SA) | 84733080 |
- Suitable location
- Processor
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.
