FLIR DM 285-FK thermal imaging camera Black 160 x 120 pixels Built-in display TFT
zoom_out_map
chevron_left chevron_right
Out-of-Stock

FLIR DM 285-FK thermal imaging camera Black 160 x 120 pixels Built-in display TFT

FLIR DM 285-FK, 50°, 38°, Grayscale, Ironbow, 99 Hz, 150 mK, 160 x 120 pixels

€1,200.99 Tax included

€984.42 Tax excluded

Shipping excluded
block Out-of-Stock
Paga in comode rate senza costi né interessi
/mese

Close
VALIDO CON TRIPPODO PLUS

● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.

● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
 
The FLIR DM285 thermal imaging digital multimeter is a professional, integrated digital multimeter with true RMS measurement and a thermal imaging module that allows you to locate electrical problems for faster resolution.

By using a thermal imaging module with a resolution of 160x120 and Infrared Assisted Measurement (IGM) technology, the DM285 allows you to visually locate an electrical problem, which speeds up your work and increases its efficiency.

Thanks to the IGM function, switchboards, connectors and cables can be checked from a safe distance without the need for direct contact.

Once the problem has been identified with IGM, the DM285 allows the results to be checked and confirmed with advanced contact measurement functions that enable the resolution of even the most complex electrical problems.

The device will be perfect for applications such as installation and service of electronic devices, electrical installations in commercial buildings, smaller industrial installations, field service and servicing of heating, ventilation and air conditioning systems.

The DM285 uses a unique Bluetooth® interface that enables wireless data transmission by connecting to the FLIR Tools Mobile ™ app on compatible mobile devices.

The DM285 is also compatible with the new FLIR InSite ™ workflow management tool for optimized inspection routing, accurate documentation, customer information sharing and instant reporting.

The FLIR DM285-FK set includes the flexible FLIR TA74 measuring clamps, which facilitate work and extend the capabilities of your multimeter. The slim 18-inch long flexible coil clamp and locking mechanism allow measurements to be taken in tight or awkward locations - making them ideal for multi-lead measurements that require double wrap and deeper access. The connection is a standard banana plug and the output is a voltage indicator, so they are compatible with most DMMs and clamp meters, regardless of brand.

The included Li-Poly FLIR TA04 battery extends the operating time of the device to 12 hours. The set includes a wall charger with EU, UK, US, AU and CN adapters.

Fast and safe troubleshooting
- Thermal imaging allows you to quickly scan for overheated components and use the DMM testing feature to diagnose failures.
- Exact localization of faults thanks to the thermal imaging module with a resolution of 160x120
- Scanning with IGM without the need for direct contact
- Streamlined audits and simplified collection, sharing and reporting with wireless connection to FLIR InSite ™
- Built-in memory allows you to save electrical parameters and thermal images

Easily troubleshoot difficult problems
- Comprehensive check of the condition of electrical installations thanks to readings that are always reliable, even with complex measurements.
- Multimeter with 18 functions such as VFD mode, true RMS measurement, low impedance measurement and NCV
- Thermocouple input
- Simultaneous preview of thermal imaging and thermocouple measurements

Design and functionality tailored to the needs of specialists
- Integrated tool with high durability.
- Built-in work light and laser pointer for easy work
- Quick battery replacement thanks to the "no tool" compartment
- Clear readings on TFT display with wide viewing angle and simple interface
- Robust device with proven drop resistance and 10-year warranty

Technical specification

Thermovision
- Simultaneous preview of thermovision and thermocouple measurements
- Image resolution: 19200px (160x120)
- Imaging detector: FLIR Lepton® microbolometer
- Thermal sensitivity (MRTD): ≤150mK
- Emissivity: 4 adjustable presets
- Accuracy: ± 3 ° C or ± 3.5%
- Measurement range: -10 ° C to 150 ° C (14 ° F to 302 ° F)
- Image sharpness: fixed focus
- Field of view: HFOV (horizontal) 50 °, VFOV (vertical) 38 °
- Laser pointer
- Color palettes: iron, rainbow and shades of gray
- Level and span: auto

Measurement functions

- True RMS measurement
- Automatic range selection with the option of manual adjustment
- Voltage AC / DC V: 1000V ± 1.0% / 0.09%, AC / DC mV: 600mV ± 1.0% / 0.5%, VFD AC V: 1000V ± 1.0%, AC / DC LoZ V: 1000V ± 1.0%
- Current AC / DC A: 10.00A ± 1.5%, AC / DC mA: 600.0mA ± 1.5%, AC / DC µA: 4000µA ± 1.0%
- Resistance: 6.000MΩ ± 0.9%, 50.00MΩ ± 3.0%
- Capacity: 10.00mF ± 1.9%
- Diode test: 1.500V ± 0.9%
- Frequency range: 99.99kHz ± 0.1%
- Thermocouple: K-type from -40 ° C to 400 ° C (from -40 ° F to 752 ° F) ± 1.0% + 3 ° C (IGM)
- Continuity check threshold: from 20Ω to 200Ω
- Min / Max / Avg function
- Measurement speed: 3 samples per second
- Measurement range of optional TA72 / 74 clamps: 3000A AC ± 3.0% + 5 digits

General Information
- Drop resistance: 3m
- Waterproof: IP40
- Lighting: LED lights
- Display: 2.8 "TFT
- Power supply: 3x AA batteries or TA04 Li-Poly battery
- Battery life (all modes on): AA batteries 3h, TA04 rechargeable battery 12h.
- Data logging and storage: 10 sets of 40K scalar measurements, 100 images
- Data transmission: Bluetooth®
- Automatic shutdown
- Safety category classification: CAT III 1000V, CAT IV 600V
- Warranty: 10 years (product and detector)
- Product dimensions: 200x95x49mm
- Product weight: 537g
- Package dimensions: 330x140x110mm
- Package weight: 1150g

Composition of the kit

- Universal multimeter FLIR DM285-FK
- Flexible measuring clamp TA74
- K type thermocouple
- Silicone cables
- Measuring crocodile clips with CAT IV insulation
- TA04 Li-Poly battery + mains charger with a set of adapters
- 3x AA batteries
- Container for test lead / tripod accessory
- Convenient case
- Shortened multilingual instruction manual in printed version (including in Polish)
- Extended warranty registration card

FLIR DM 285-FK. Horizontal field of view: 50°, Vertical field of view: 38°, Standard palettes: Grayscale, Ironbow. Sensor resolution (thermal module): 160 x 120 pixels. Product colour: Black, Display type: TFT, Display diagonal: 5.08 cm (2"). Battery life (max): 12 h. Width: 200 mm, Depth: 95 mm, Height: 49 mm
Prestazione
campo di visione orizzontale50°
campo di visione verticale38°
Palette standardScala di grigio, Ironbow
Frequenza dei fotogrammi termici99 Hz
Sensibilità termica (NETD)150 mK
Sistema di lente
Risoluzione del sensore (modulo termico)160 x 120 Pixel
Design
Colore del prodottoNero
Display incorporato
Tipo di displayTFT
Dimensioni schermo5,08 cm (2")
Risoluzione del display160 x 120 Pixel
Intervallo temperatura di funzionamento-10 - 150 °C
Caratteristiche
GPS (satellitare)No
Wi-FiNo
Batteria
Durata batteria12 h
Dimensioni e peso
Larghezza200 mm
Profondità95 mm
Altezza49 mm
Peso537 g
Dati su imballaggio
Larghezza imballo330 mm
Profondità imballo140 mm
Altezza imballo110 mm
Peso dell'imballo1,15 kg
Contenuto dell'imballo
Manuale dell'utente
Caricabatterie
FLIR
DM 285-FK
0793950373880
Display diagonal
5.08 cm (2")
Display resolution
160 x 120 pixels
Product colour
Black
Display type
TFT
Built-in display
Y

SHIPMENTS

All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).

The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.

The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.

Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.

RIGHT OF WITHDRAWAL

To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.

Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:

APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome

or at the email address info@trippodo.com or by fax at +39 06 99367459.

It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.

It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.

The refund will be made within 14 calendar days from the arrival of the object at our office.

NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.